NSW Codes of Practice are now legally enforceable
From 1 July 2026, NSW businesses must comply with applicable WHS Codes of Practice or use another method that provides an equivalent or higher standard of health and safety.
For property and facilities teams, relevant Codes may include roof work, falls, electrical risks, asbestos, confined spaces, plant, workplace facilities and contractor coordination.
This creates a practical need to identify which Codes apply to common property activities and check whether existing portfolio standards meet them. Where an alternative control is used, the basis for considering it equivalent or better should be clear and supported by evidence.
Link: SafeWork NSW guidance on Codes of Practice
New biological hazards Code
The NSW Code of Practice for managing biological hazards commenced on 10 July 2026.
It covers viruses, bacteria, mould and other biological hazards that can be present in workplaces. Importantly for facilities teams, it also addresses contaminated indoor air, ventilation, air cleaning, routine cleaning and waste management.
These issues can sit between property, safety, cleaning, maintenance and occupational hygiene functions. The new Code provides a clearer benchmark for determining who is responsible, what controls are required and how those controls should be maintained and reviewed.
Link: Managing the risks of biological hazards at work
NSW regulator priorities
SafeWork NSW has identified four regulatory priorities for 2026–27:
- Falls from heights.
- Psychosocial risks.
- Hazardous substances.
- Mobile plant, vehicles and fixed machinery.
Each can arise within a property portfolio, often through maintenance activities, contractors, shared workplaces and interactions between building operations and tenant activities.
The priorities provide a useful prompt to consider whether assurance activity is focused on the areas where the regulator expects meaningful improvement.
Link: SafeWork NSW 2026–27 Regulatory Statement
Victorian maintenance alerts
WorkSafe Victoria has recently issued guidance on two routine but potentially high risk maintenance activities.
The first concerns lifting air conditioners and other equipment onto roofs. It highlights fall, falling object and manual handling risks, with mechanical lifting aids and exclusion zones identified as important controls.
The second concerns the use of power tools on asbestos containing materials. It reinforces the need for engineering controls, atmospheric monitoring and supporting documentation.
Both provide a reminder that contractor prequalification, licences and a SWMS do not necessarily demonstrate that controls are being applied when the work is performed.
What should property teams review?
The common thread across these developments is the gap that can exist between portfolio requirements and work as actually performed.
Three areas are worth reviewing:
- Whether property standards reflect current legal requirements and regulator guidance.
- Whether contractor controls clearly address the risks associated with the work.
- Whether site assurance provides confidence that those controls are working in practice.